SKV Plastic Industries LLC, established in 2014, it is high-tech enterprises specializing in developing, producing and selling polyethylene foam products. The company is located in the center of Dubai. By the management in PE Form fields, They can be widely used in construction, packaging, insulation etc. Our products are PE Foam Backup Rods, PE Foam Fruit Nets, PE Foam Pipes, PE foam Profiles, PE Foam Sheets. Looking forward to the future, we are full of pride to co-operate with friends in the industry sincerely, to work and develop together, to create the prosperity together.
To satisfy the needs and expectations of our clients by delivering on-time, high-quality products and services with competitive pricing and long term consistent value. To attain and keep long term relationships with a vast network of vendors and customers.
To be our client's first preference when selecting a world-class manufacturer of PE Foam, Air Bubble and PVC Products. We aspire to exceed our customer's quality, delivery, and cost expectations through constant improvement and customer interaction.
Joints Preparation: The Joint surface must be clean, dry and free from oil, loose particles, cement laitance ant other contaminants which may affect the adhesion. A thorough wire brushing, grinding, sand blasting or solvent cleaning may be required to expose a clean and sound substrate .On painted surfaces all loosely adhering paint must be removed, if in doubt remove all previous decoartions.Remove all round or sharp edges and corners which might perforate or cause damage to the backing rod. The compressible joint filler shall be cut back to expose a uniform joint depth.
Select a backer rod whose diameter is at least 20% larger but not greater than 33% of the joint width. This will ensure that the backer rod remains in compression and in place during sealant installation. The backing rod shall be inserted into the joints by using a blunt tool or roller and forced gently into the joint till the desired depth is achieved.
Joints Preparation: The Joint surface must be clean, dry and free from oil, loose particles, cement laitance ant other contaminants which may affect the adhesion. A thorough wire brushing, grinding, sand blasting or solvent cleaning may be required to expose a clean and sound substrate .On painted surfaces all loosely adhering paint must be removed, if in doubt remove all previous deccartions. Remove all round or sharp edges and corners which might perforate or cause damage to the backing rod. The compressible joint filler shall be cut back to expose a uniform joint.
Copyright © www.skvplastic.com 2024. All rights reserved.
www.ciber.ae